AMD SB600 User Manual download pdf (Page 15)



(7) Power switch: PWR BTN

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the

system.

(8) FAN Power Headers: SYSFAN1, SYSFAN2 (3-pin), CPUFAN (4-pin)

These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the fan

manufacturer, the wire and plug may be different. The red wire should be positive,

while the black should be ground. Connect the fan’s plug to the board taking into

consideration the polarity of connector.

FAN Power Headers

CPUFAN

GND

+12V

CPUFAN IN

CPUFAN OUT

SYSFAN1

SYSFAN2

(9) CD Audio-In Headers (4-pin) : CDIN

CDIN are the connectors for CD-Audio Input signal. Please

connect it to CD-ROM CD-Audio output connector.

(10) Parallel Port Header (25-pin male): PARALLEL1

The On-board Parallel Port can be disabled through the BIOS

SETUP.

(11)

Serial COM Port Header: COM1

COM1 is the 9-pin block pin-header. The On-board serial

port can be disabled through BIOS SETUP.

(12) TV-OUT Header

TV-OUT is the 9-pin block pin-header. TV-out is

commonly used to label the connector of equipment offering

an analog video signal that is acceptable for a television AV

input.

CD Audio-In Headers

CDIN

4 1

Pin 1

PARALLEL

Serial COM Port 9-pin Block

Pin1

TV-OUT Conn. 9-pin Block

Pin1

1 2 ... 10 11 12 13 14 15 16

No comments

AMD SB600 User Manual Page 15