Amd AN9 32X User Manual download pdf (Page 45)

BIOS Setup

AN9 32X 3-13

3.3 Advanced BIOS Features

Phoenix – Award BIOS CMOS Setup Utility

Advanced BIOS Features

Quick Power on Self Test Enabled Item Help

► Hard Disk Boot Priority Press Enter

First Boot Device Floppy

Second Boot Device Hard Disk

Third Boot Device CDROM

Boot Other Device Enabled

Boot Up Floppy Seek Disabled

Boot Up NumLock Status On

Security Option Setup

MPS Version Ctrl For OS 1.4

Full Screen Logo Show Enabled

↓↑

→←

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Quick Power On Self Test

When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering on

the system. The BIOS shorten or skip some check during the POST.

Hard Disk Boot Priority

This item selects the hard disks booting priority. By pressing <Enter> key, you can enter its

submenu where the hard disks detected can be selected for the booting sequence to boot up

system.

This item functions only when there is the option of [Hard Disk] in any one of the

First/Second/Third Boot Device items.

First Boot Device / Second Boot Device / Third Boot Device / Boot Other Device

Select the drive to boot first, second and third in the [First Boot Device], [Second Boot Device],

and [Third Boot Device] items respectively. The BIOS will boot the operating system according

to the sequence of the drive selected. Set [Boot Other Device] to [Enabled] if you wish to boot

from another device other than these three items.

Boot Up Floppy Seek

When the computer boots up, the BIOS detects if the system has a FDD or not. When this item

is set to Enabled, if the BIOS detects no floppy drive, it will display a floppy disk drive error

message. If this item is disabled, the BIOS will skip this test. The default setting is Disabled.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

No comments

Amd AN9 32X User Manual Page 45