46959A - March 2009 1

AMD Geode™ LX Processor

DDR2 BIOS Porting Guide

1.0 Scope

The AMD Geode™ LX processor has an integrated DDR

memory controller. Due to the concerns over the availability

and increasing cost of DDR, AMD has developed a method

for operating DDR2 memory with the processor’s memory

controller. This application note details the software

changes necessary to enable this technology.

Note: The solution described in this document does not

conform to the JEDEC DDR2 Specification. This

solution may not work with all DDR2 memory.

Note: This is revision B of this document. The change

from revision A (also dated March 2009) is “AMD

Confidential” was removed.

2.0 Description

Initializing DDR2 SDRAM requires writing to additional

mode registers. In addition to the Mode Register (MR) and

Extended Mode Register (EMR), DDR2 defines two new

Extended Mode Registers, EMR(2) and EMR(3). The EMR

is renamed as EMR(1). Furthermore, the MR and EMR

definitions are not an exact match between DDR and

DDR2. Table 2-1 shows a comparison of the typical initial-

ization steps for DDR vs. DDR2.

Addressing MR vs. EMR(1), EMR(2) or EMR(3) is deter-

mined by the states of BA[2:0] while the LOAD MODE com-

mand is presented on the control signals. The data written

to the registers is the pattern presented on A[15:0] when

the command is initiated. (Note, however, that A[15:13]=0,

and BA[2]=0 in all cases.)

Software on the LX processor issues LOAD MODE com-

mands by writing the MC_CF07_DATA register. During the

operation, the memory controller (MC) uses various bits

and fields in the MC_CF07_DATA and MC_CF8F_DATA

registers. With the available settings, the LX processor is

not capable of generating the necessary signal patterns for

all the required LOAD MODE commands.

Table 2-1. Initialization Steps

DDR DDR2

Wait a minimum of 200µs

after clocks and power are

stable, then assert CKE.

Wait a minimum of 200µs

after clocks and power are

stable, then assert CKE.

Wait a minimum of 400ns,

then issue a PRE-

CHARGE ALL command.

Wait a minimum of 400ns,

then issue a PRE-

CHARGE ALL command.

Issue a LOAD MODE

command to EMR(2)

Issue a LOAD MODE

command to EMR(3).

Issue a LOAD MODE

command to EMR to

enable the DLL.

Issue a LOAD MODE

command to EMR(1) to

enable the DLL.

Issue LOAD MODE com-

mand to MR with DLL

reset.

Issue LOAD MODE com-

mand to MR with DLL

reset.

Wait at least 200 clock

cycles. Issue a PRE-

CHARGE ALL command.

Wait at least 200 clock

cycles. Issue a PRE-

CHARGE ALL command.

Issue two REFRESH

commands.

Issue two REFRESH

commands.

Issue LOAD MODE to MR

without DLL reset.

Issue LOAD MODE to MR

without DLL reset.

Issue LOAD MODE to

EMR(1) with OCD default.

Issue LOAD MODE to

EMR(1) with OCD exit.

SDRAM initialization is

complete.

SDRAM initialization is

complete.

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - DDR2 BIOS Porting Guide

46959A - March 2009 1AMD Geode™ LX Processor DDR2 BIOS Porting Guide1.0 ScopeThe AMD Geode™ LX processor has an integrated DDRmemory controller. Due t

Page 2 - 3.0 Solution

2 AMD Geode™ LX Processor DDR2 BIOS Porting Guide46959A - March 2009Application Note3.0 SolutionThe method for initializing DDR2 memory on the process

Page 3 - 3.2 CPLD Registers

AMD Geode™ LX Processor DDR2 BIOS Porting Guide 346959A - March 2009 Application Note3.2 CPLD RegistersThe CPLD contains two registers that indicate h

Page 4 - 3.3 Initialization Steps

4 AMD Geode™ LX Processor DDR2 BIOS Porting Guide46959A - March 2009Application Note3.3 Initialization StepsSome of the following steps may be optiona

Page 5 - 3.3.2 SDRAM Initialization

AMD Geode™ LX Processor DDR2 BIOS Porting Guide 546959A - March 2009 Application Notecally supportable. As an example, consider the follow-ing DIMM ch

Page 6 - Application Note

6 AMD Geode™ LX Processor DDR2 BIOS Porting Guide46959A - March 2009Application Notethe CPLD are typically 0. Set SW_EN# high andBA[1:0] to 01b.Next,

Page 7

AMD Geode™ LX Processor DDR2 BIOS Porting Guide 746959A - March 2009 Application Note3.4 Other Information and RestrictionsThe LX processor/DDR2 solut

Page 8 - TRADEMARKS

Comments to this Manuals

No comments

Samsung UN32D4003BD manuels

Manuels d'utilisation et guides de l'utilisateur pour Télévisions LED Samsung UN32D4003BD.
Nous fournissons des manuels en pdf 1 Samsung UN32D4003BD à télécharger gratuitement par type de document : Manuel de l'utilisateur

Samsung UN32D4003BD Manuel de l'utilisateur (64 pages)

marque: Samsung | Catégorie: LED TVs | Taille: 8.41 MB |

Table des matières

User Manual

Still image warning

Contents

Getting Started

01 Getting Started

Viewing the Control Panel

Connecting to an Antenna

ConnectionsConnections

02 Connections

Connections

Channel List

Basic Features

03 Basic Features

Picture Options

¦ Setting the Time

¦ Using the Sleep Timer

¦ Setting the On/Off Timer

¦ Other Features

Advanced Features

Photo Music Setup

Other Information

05 Other Information

¦ License

Contenido

Introducción

01 Introducción

Conexión de una antena

Conexiones

02 Conexiones

Lista de canales

Funciones básicas

03 Funciones básicas

Opciones de imagen

¦ Conﬁguración de la hora

¦ Otras funciones

Funciones avanzadas

Información adicional

05 Información adicional

¦ Licencia

Esta página se ha dejado

Plus de produits et de manuels pour Télévisions LED Samsung

Modèles	Type de document
HG32NA470GF	Manuel d'installation Samsung HG39NA578CF, 43 pages
HG55EA790MSXZT	Manuel d'installation Samsung HG55EA790MSXZT 55" Full HD 3D compatibility Smart TV Black LED TV, 77 pages
UN50EH5000F	Manuel de l'utilisateur Samsung UN50EH5000F, 16 pages
UN55HU8550F	Spécifications Samsung UN55HU8550F 54.6" 4K Ultra HD 3D compatibility Smart TV Wi-Fi Black, Silver, 231 pages
UN55FH6200	Manuel de l'utilisateur Samsung UN50ES6500F 49.5" Full HD 3D compatibility Smart TV Black, 675 pages
UN39FH5000F	Spécifications Samsung UN39FH5000F, 4 pages
UN40EH5000F	Manuel de l'utilisateur Samsung UN40EH5000F 40" Full HD Black, 2 pages
UA32D4000	Spécifications Samsung UA32D4000 LED TV, 176 pages
UE55F6800SS	Manuel Samsung UE55F6800SS 55" Full HD 3D compatibility Smart TV Wi-Fi Black, 194 pages
UN46EH5000F	Manuel de l'utilisateur Samsung UN46EH5000F 46" Full HD Black, 16 pages
HG39EC470HW	Manuel d'installation Samsung HG22EC470CW 22" Full HD Black, 57 pages
UN40EH6030	Manuel de l'utilisateur Samsung UN40EH6030, 45 pages
UE28H4000AW	Manuel de l'utilisateur Samsung UE19H4000AW 19" Black, 125 pages
T24C550ND	Manuel de l'utilisateur Samsung T24C550ND 23.6" Full HD Charcoal LED TV, 46 pages
UE55C9000SW	Manuel de l'utilisateur Samsung UE55C9000SW User manual, 121 pages
UN32EH4003	Manuel de l'utilisateur Samsung UN32EH4003 31.5" HD-ready Black, 2 pages
UE55F9000SZ	Manuel Samsung UE55F9000SZ 55" 4K Ultra HD 3D compatibility Smart TV Wi-Fi Black, 202 pages
UN40D5500RF	Manuel de l'utilisateur Samsung UN40D5500RF, 19 pages
UN60H7100AF	Spécifications Samsung UN60H7100AF 60" Full HD 3D compatibility Smart TV Wi-Fi Silver, 227 pages
UE40B7020WW	Manuel de l'utilisateur Samsung UE40B7020WW User manual, 108 pages

AMD CS5536 User Manual Page 1