Amd GA-M61P-S3 User Manual download pdf (Page 59)

Appendix- 59 -

English

Step 2: The process of system reading the BIOS file from the floppy disk is displayed on the screen.

When the message "Are you sure to update BIOS?" appears, press ENTER. The BIOS update

will begin and the current process will be displayed.

1. Do not turn off or restart the system when the system is reading/updating the BIOS.

2. Do not remove the floppy disk or hard drive/USB drive when the system is updating the BIOS.

Step 3: When the update process is complete, press any key to return to the Q-Flash main menu.

Step 4: Press ESC and then DELETE to exit Q-Flash and the system will restart. As the system reboots,

you will see the new BIOS version during POST.

Step 5: As the system reboots, press DELETE to enter BIOS Setup. Select Load Optimized De-

faults and press ENTER to load BIOS defaults. System will re-detect all peripherals devices

after BIOS update, so we recommend that you reload BIOS defaults.

Press Y to load BIOS defaults

Step 6: Select Save & Exit Setup and then press Y to save settings to CMOS and exit BIOS Setup.

When the system restarts, the whole update process is complete.

Q-Flash Utility v2.00

Flash Type/Size.................................SST 25VF040B 512K

Keep DMI Data Enable

Update BIOS from Drive

Save BIOS to Drive

Enter : Run :Move ESC:Reset F10:Power Off

!! Copy BIOS completed - Pass !!

Please press any key to continue

 Standard CMOS Features

 Advanced BIOS Features

 Integrated Peripherals

 Power Management Setup

 PnP/PCI Configurations

 PC Health Status

Esc: Quit : Select Item

F8: Q-Flash F10: Save & Exit Setup

Load Optimized Defaults

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

Load Optimized Defaults (Y/N)? N

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 79 80

No comments

Amd GA-M61P-S3 User Manual Page 59