AMD CS5535 User Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
UNO-2059E User Manual 10
2.4 LAN: Ethernet Connector
The UNO-2059E is equipped with Realtek RTL8100BL Ethernet LAN
controller that is fully compliant with IEEE 802.3u 10/100Base-T
CSMA/CD standards. The Ethernet port provides a standard RJ-45 jack
on board, and LED indicators on the front side to show its Link (Yellow
LED) and Active (Green LED) status.
2.5 Power Connector
The UNO-2059E comes with a Phoenix connector that carries
18~48 V
DC
external power input, and features reversed wiring protection.
Therefore, it will not cause any damage to the system by reversed wiring
of ground line and power line.
2.6 LED Indicators
There are three LEDs on the UNO-2059E front panel for indicating sys-
tem status: PWR LED is for power status, DIAG LED is programmable
by user's requirement and IDE LED is for IDE bus status.
2.7 PS/2 Keyboard and Mouse Connector
The UNO-2059E provides a PS/2 keyboard and PS/2 mouse connector. A
6-pin mini-DIN connector is located on the rear panel of the
UNO-2059E. The UNO-2059E comes with an adapter to convert from
the 6-pin mini-DIN connector to two 6-pin mini-DIN connectors for PS/2
keyboard and PS/2 mouse connection. Please refer to Appendix A.6 for
its pin assignments.
2.8 USB1 & USB2: Universal Serial Bus Connectors
The USB connector is used for connecting any device that conforms to
the USB interface. Many recent digital devices conform to this standard.
The USB interface supports Plug & Play, which enables you to connect or
disconnect a device whenever you want without turning off the computer.
The UNO-2059E provides two connectors of USB interfaces, which
gives complete Plug & Play and hot swapping for up to 127 external
devices. The USB interface complies with USB specification OpenHCI,
Rev. 1.0. The USB interface can be disabled in the system BIOS setup.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Comments to this Manuals

No comments