UNO-2059E User Manual 14
Chapter 3 Initial Setup
3.1 Inserting CompactFlash Card
The procedure for installing a CompactFlash card into the
UNO-2059E is as follow, please follows these steps carefully.
Step 1: Remove the power cord.
Step 2: Unscrew four screws from the rear panel of the UNO-2059E.
Step 3: Remove the rear panel.
Step 4: Plug a CompactFlash card with user’s OS and application pro-
gram into a CompactFlash card slot on board.
Step 5: Screw back the rear panel with four screws.
3.2 Chassis Grounding
The aluminum made UNO-2059E provides good EMI protection and sta-
ble system grounding base. There is an easy-to-connect chassis grounding
point for you to connect to the “Earth.” Users can select if connecting
power grounding with chassis grounding with an onboard jumper selec-
tion.
Figure 3.1:
Chassis Grounding Connection
s
UNO-2059E has onboard jumper JP1 to select if connecting chassis
ground with system's power ground.
Comments to this Manuals