AMD GA-M55S-S3 User Manual download pdf (Page 75)

Appendix- 75 -

English

Step 3:

If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 15 below

will appear. Use the ARROW keys to select NVIDIA RAID CLASS DRIVER (Figure 15) and press

ENTER. Later, when a screen similar to Figure 16 appears, you must press S to select additional

driver. The screen will return to previous screen as shown in Figure 15. Select NVIDIA nForce

Storage Controller and press ENTER.

Figure 15

Figure 16

If a message appears saying one or some file(s) cannot be found, please check the floppy disk

or copy the correct SATA driver again from the motherboard driver CD.

Windows Setup

ENTER=Select F3=Exit

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

NVIDIA RAID CLASS DRIVER (required)

NVIDIA NForce Storage Controller (required)

Windows Setup

S=Specify Additional Device ENTER=Continue F3=Exit

Setup will load support for the following mass storage device(s):

NVIDIA RAID CLASS DRIVER (required)

* To specify additional SCSI adapters, CD-ROM drives, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storage device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 87 88

No comments

AMD GA-M55S-S3 User Manual Page 75