Amd AN9 32X User Manual download pdf (Page 53)

BIOS Setup

AN9 32X 3-21

3.6 Power Management Setup

Phoenix – Award BIOS CMOS Setup Utility

Power Management Setup

ACPI Suspend Type S3(Suspend-To-RAM) Item Help

- USB Resume from S3 Disabled

Power Button Function Instant-Off

Wakeup by PME# of PCI Enabled

Wakeup by OnChip LAN Enabled

Wakeup by Alarm Disabled

X - Day (of Month) Alarm 0

X - Time (hh:mm:ss) Alarm 0: 0 : 0

Cool’n’Quiet Technology Auto

Power On Function Button Only

X - KB Power On Password Enter

X - Hot Key Power On Ctrl-F1

Restore on AC Power Loss Power Off

↓↑

→←

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

ACPI Suspend Type

This item selects the type of Suspend mode.

[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.

[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.

- USB Resume from S3

When set to [Enabled], this item allows you to use a USB device to wake up a system that is in

the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI

Suspend Type” is set to [S3(STR)].

Power Button Function

This item selects the method of powering off your system:

[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system.

This will prevent the system from powering off in case you accidentally hit or pushed the power

button.

[Instant-Off]: Pressing and then releasing the power button at once will immediately power

off the system.

Wakeup by PME# of PCI

When set to [Enabled], access through the add-on PCI card can remotely wake up the system

that was in Soft-Off condition. The PCI card must support the wake up function.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 75 76

No comments

Amd AN9 32X User Manual Page 53