Amd AN9 32X User Manual download pdf (Page 54)

Wakeup by OnChip LAN

When set to [Enabled], you can remotely wake up a PC in Soft-Off condition via a LAN card that

support the wake up function.

Wakeup by Alarm

When set to [Enabled], you can set the date and time you would like the Soft-Off PC to

power-on in the “Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm” items. However,

if the system is being accessed by incoming calls or the network (Resume On Ring/LAN) prior to

the date and time set in these items, the system will give priority to the incoming calls or

network instead.

- Date (of Month) Alarm

[0]: This option power-on the system everyday according to the time set in the “Time

(hh:mm:ss) Alarm” item.

[1-31]: This option selects a date you would like the system to power-on. The system will

power-on on the date set, and the time set in the “Time (hh:mm:ss) Alarm” item.

- Time (hh:mm:ss) Alarm

This item sets the time you would like the system to power-on.

Cool ’n’ Quiet Technology:

This option enables or disables the AMD K8 cool and quiet function.

Power On Function

This item selects the way you want your system to power on.

[Password]: Use a password to power on the system, select this option then press <Enter>.

Enter your password. You can enter up to 5 characters. Type in exactly the same password to

confirm, and then press <Enter>.

[Hot KEY]: Use any of the function keys between <F1> to <F12> to power on the system.

[Mouse Left]: Double click the mouse left button to power on the system.

[Mouse Right]: Double click the mouse right button to power on the system.

[Any KEY]: Use any keyboard keys to power on the system.

[Button Only]: Use only the power button to power on the system.

[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard to power

on the system.

※ To enable this “Power On” function, the wake-up header of [USB-PWR1] and

[USB-PWR2] must be set to [Enabled] position. Please refer to the configuration

of “Wake-up Header” [USB-PWR1] and [USB-PWR2] in section 2.3.2, chapter 2.

※ The mouse wake up function can only be used with the PS/2 mouse, not with

the COM port or USB type. Some PS/2 mice cannot wake up the system because

of compatible problems. If the specs of your keyboard are too old, it may fail to

power on.

3-22 AN9 32X

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 75 76

No comments

Amd AN9 32X User Manual Page 54